How to Solve Valve Core Leakage

The methods to solve the problem of valve core leakage vary depending on the application scenario and type of the valve core. The following are specific solutions for different types of valve core leakage:

Valve core leakage in automobiles

Cleaning carbon deposits and burnout: Clean the carbon deposits or burnout between the valve and the valve seat, and grind or replace if necessary.

Adjust the fit clearance: Adjust the fit clearance between the valve and the valve guide to ensure that the clearance is moderate.

Replace the valve spring: If the valve spring is not elastic enough or broken, it should be replaced in time.

Adjust the valve clearance: Re-adjust the valve clearance to ensure that the valve stem and other parts have enough room for expansion after heating.

Replace the aging valve nozzle: If the cause of the leakage is the aging of the valve nozzle, you need to replace it with a new one, and cut off the old valve and install a new one.

Ensure sealing: Use a special valve core key or wrench to tighten the valve core to ensure sealing.

Valve core leakage in bicycles, carts, etc.

Replace the aging valve nozzle: If the cause of the leakage is the aging of the valve nozzle, you need to replace it with a new one.

Reinstall the valve: Use a special valve removal tool and valve to reinstall the valve and ensure a tight fit.

Battery vehicle valve core leaks

Quick repair: Use self-repairing fluid to repair leaks, suitable for quick repair.

General advice

Regular inspection: In daily use, the condition of the valve core should be checked regularly.

Timely replacement: Replace aging valves in time to avoid leakage.

Keep clean: Keep the valve core clean to extend its service life.

Following the above methods, you can effectively solve the problem of valve core leakage and ensure the safety and normal use of the vehicle.